Как обновить BIOS ASUS, HP, Lenovo, MSI, Acer, Samsung, Dell, Gigabyte, Asrock, AMI, Phenix Award

Posted on

Hello! This is a video on how to update the BIOS and whether to do it In my previous video called "How to enter the BIOS or UEFI "I'm telling you what the BIOS and UEFI-, which These firmware types exist, how to enter BIOS or UEFI-, as well as how to boot from a flash drive or DVD

A link to the video will be in the description This manual will help to update the BIOS AMI, Phoenix Award computer or laptop ASUS, HP, Lenovo, MSI, Acer, Samsung, etc These BIOS using the motherboard makers Asus, Gigabyte, MSI, EVGA, Intel, Asrock, etc In some cases, you need to update the BIOS? If your computer runs without any problems, as well as all connected devices to your PC do not have any problems with the performance, the BIOS does not need to be updated If you have a relatively old computer, and you do not You can properly connect some sort of device, then BIOS update may fix this problem

Also, when running Windows 8 or 10 on an old PC BIOSa update can solve the problem with the incorrect the work of some drivers Sometimes, when you try to install Windows 10 on an old computer you may encounter just such a "hovering" screen in the first box after the computer and the inability to download further installation system (previously, I have personally experienced this problem) And her decision was BIOSa update to the latest version I hasten to note that BIOSa update very risky process and any failure to remedy the situation It will be much more difficult than to reinstall Windows Also, before you begin the upgrade, fully Charge your laptop battery or use power uninterruptible power supply for your computer for security reasons themselves from sudden power cut during the process updates

If you do decide to update the BIOS, the first all you need to know the name and model of your motherboard board and the current version BIOSa If you have collected or notebook computer known producer (eg, Dell, HP, Acer, Lenovo and so on) instead of the name of the motherboard model you need to know your computer The name of the motherboard can be found in several ways The first way – it's just to remove the computer cover and look at the motherboard itself As can be seen from the example, this is a huge sign of the center of the motherboard

The second method – is to click the key combination and Win + R enter "msinfo32" In the "Manufacturer of the main board" and "Model the main board "and you will find the name and model of your motherboard There is also need to find out the current version BIOSa, which installed on your PC In the line "the BIOS version" and you will be able to detect this information If you do not know the model of your computer or laptop, where you can also find this information in the "Manufacturer" and "Model"

The third way to know the name and model of the motherboard – Run the command prompt and type of queue the following two commands (these commands will be in the description under the video): 1) "wmic baseboard get manufacturer"; 2) "wmic baseboard get product"; The first command enables find out the name of the motherboard, the second – a model Using the name and model of your computer, type in the search system similar request: "Dell Optiplex 790 Bios update" In your case, it may also be the name and model motherboard, for example, Gigabyte GA-H77M-D3H " Go to the first page found, and look at it content Here, I can download the latest version of BIOSa for my computer, by clicking on "Upload file" and can be viewed BIOSa previous versions and supports systems as well as read the installation instructions and important information

If you are convinced that this BIOS you need is downloading this file BIOS update can be in a DOS system, the BIOSe or in the environment Windows I recommend to update the Windows environment, as it the easiest to understand the way in which the can handle even the novice I note that, depending on the motherboard manufacturer board and model of your computer, these programs can be very very different from the one that I'm going to use, and may also be very different actions to be hold for a successful upgrade BIOSa, so Carefully read the instructions before you upgrade, which can also be found on the website And so, close all programs that can only be shut down and run the downloaded file

After that, I see the alert box that will the BIOS update process and have to close all open documents and programs, this can not be interrupted procedure after the start and disconnect the computer from network Interruption of the procedure is likely to make your system unusable Click "OK", see the alert box again, we want to Do we continue the procedure BIOSa updates, as well as, We see a list of differences between the set and BIOSom the latest version Click "OK" and then start the process of preparing for the upgrade Upon completion, restart the computer

Immediately after the restart will begin the update process BIOSa, which in my case took a few seconds and at the end I saw a report that the update successfully completed Further, as a system reboot has been made, and loaded desktop after completion No further action to update It did not need to do BIOSa To check the success of the upgrade, you can also press the key combination Win + R, enter "msinfo32" in line "The BIOS version" to see the result If you liked this video, put Like and subscribe Canal

We will be glad to answer any questions in the comments Thank you for your attention, good luck

Source: Youtube